INSTANT CONTROL IS8380

Essentials

Exclusive and Patented Press & Steam
Vertical Support for an effortless steaming session, that provides a flat surface to press the garment and that holds it in place when steaming
Time Saving & Precision
Extra Large metal steam head with pointed tip to remove creases efficiently on all fabrics. Readu to use in 45 seconds.
Ease of Use
Along with a simple on/off setting, its 1.7 liter removable water tank allows long steaming sessions.
Removable base to easily steam long clothes, sofas, curtains, sheets... as no more steam hose length constraint
Refreshes & Sanitizes
Power of 1700W and steam output of 35G/min allow a deep diffusion through the fibers to refresh and sanitize all kind of garments
Adapted to all fabrics
5 levels of steam output Steam output in handle to remove creases on all kind of fabrics even the most delicates
Accessories
4 accessories included:
- Fabric brush that open the weaves of the fabric for better steam penetration, ideal to remove creases on thick fabrics
- Crease attachment to easily create your pants creases
- Glove for hand protection
- Lint pad to remove hair, lint and animal fur for a great finish

‹ ›

‹	INSTANT CONTROL IS8380
Power	1700
Steam output	35 g/min
Heat-up time	45 s
Steam control on handle
Water tank capacity	1.7 L
Autonomy	50 min
Detachable base
Colours	Red & white
	Buy in store

Frequently Asked Questions

• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.

Technical support

There is no more steam.

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.

The appliance is no longer heating.

Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.

I can see water leaks.

The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.

The steam output decreases.

Your appliance has limescale, consult the "Descaling" section in the instructions.

The appliance produces steam constantly.

The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.

The steam stains clothing.

You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.

The appliance is spitting water.

What should I do if my appliance is not working?

After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centre

What should I do if the power cable or the cord guard of my appliance is damaged?

Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.

Various topics

Where can I dispose of my appliance at the end of its life span?

Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.

Where can I buy accessories, consumables or spare parts for my appliance?

Please go to the “Accessories” section of the website to easily find whatever you need for your product.

What are the warranty conditions of my appliance?

Find more detailed information in the Warranty section of this website.

I've just opened my new appliance and I think there is a part missing. What should I do?

If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.

How to better use my productWhat water to use?• Untreated tap water:
Your appliance has been designed to use untreated tap water.
If your water is very hard, mix 50% untreated tap water and 50% distilled water.

• Types of water not to use:
Heat concentrates the elements contained in water during evaporation. The types of water listed below may contain organic waste, mineral or chemical elements that can cause spitting, brown staining or premature wear of the appliance:
- water from clothes dryers
- scented or softened water
- water from refrigerators, batteries, air conditioners
- rain water
- boiled, filtered or bottled water

In order to ensure the best performance from your iron, these types of water should not be used for ironing.Technical supportThere is no more steam.Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The water level in the tank is too low ==> Unplug the appliance and fill the tank.
The pump is unprimed ==>Press and hold the steam button for a few seconds to prime the pump.
The removable tank is not installed correctly ==> Check the correct positioning of the tank on the product.
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.The appliance is no longer heating.Your product is not plugged in or is not switched on ==> Check that your product is properly connected to a power socket and that the switch is on "I".
The product is in "Stand-by" mode ==> Press the "On-Off" button and wait until it stops flashing.I can see water leaks.The water tank is not installed correctly or its locking valve is not closed properly ==> Check that the valve is closed and that the tank is installed correctly on the product.The steam output decreases.Your appliance has limescale, consult the "Descaling" section in the instructions.The appliance produces steam constantly.The "Steam" button is in Continuous Steam position. Unlock it by pressing it once.The steam stains clothing.You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.The appliance is spitting water.You have used descaling chemicals or additives in the water.
Never add such products to the water tank. These contain organic waste or minerals that condense under the influence of heat and cause spitting, brown dripping or premature aging of your appliance.What should I do if my appliance is not working?After following the instructions in the user manual for starting the appliance, make sure that your electrical socket is working by plugging another appliance. If it still does not work, do not try to dismantle or repair the appliance yourself, instead, take it to an approved repair centreWhat should I do if the power cable or the cord guard of my appliance is damaged?Do not use your appliance. To avoid any danger, have it replaced by an approved repair centre.Various topicsWhere can I dispose of my appliance at the end of its life span?Your appliance contains valuable materials which can be recovered or recycled. Leave it at a local civic waste collection point.Where can I buy accessories, consumables or spare parts for my appliance?Please go to the “Accessories” section of the website to easily find whatever you need for your product.What are the warranty conditions of my appliance?Find more detailed information in the Warranty section of this website.I've just opened my new appliance and I think there is a part missing. What should I do?If you believe that one part is missing, please call Consumer Services Center and we will help you find a suitable solution.

Tefal garment steamer

INSTANT CONTROL IS8380

Exclusive and Patented Press & Steam

Time Saving & Precision

Ease of Use

Refreshes & Sanitizes

Adapted to all fabrics

Accessories